Model | MXEL 8198 |
Tube Power | 36W, 18W, 9W |
EX-proof Mark | Ex D IIC Gb T6 |
Cable Entry | G3/4" |
Input Voltage (V) | 2200VAC, 50-60Hz |
Light Source | LED |
LED Tubes Size | 600mm; 1200mm |
Temperature Group | T1~T5 |
Lamp Luminous Efficiency | 100lm/w |
Die casting aluminum shell, with high voltage electrostatic plastic-spray surface.
Easy to change the tube, just remove the end cover to change.
Electronic ballast, improve the power factor largely, COS>0.95.
Tempered glass lamp shade, stainless steel exposed fastener.
Steel pipe wiring or cable wiring.
1. Applicable to zone 1 and 2 of explosive environment;
2. Applicable to IIA, IIB, IIC explosive gas environment;
3. Applicable to zone 20, 21 and 22 of explosive dust environment;
4. Applicable to the environment where the temperature group is TI-T6;
5. MXEL 8198-3 Zone1 explosion proof fluorescent light is mainly used in explosive and flammable places such as petrochemical industry. The installation can be hung or hung.
Example
Car paint room lighting, petroleum refining, chemical, bio-pharmaceutical plants, MXEL 8198-3 Zone1 explosion proof fluorescent light is the lighting of places that require high purity
Executive standard: | GB3836.1, GB3836.2.GB3836.3, IEC60079 |
Explosion-proof mark: | Ex d IIC T6 Gb |
Working voltage: | AC 220V |
Rated power: | 1*9w. 2*9w. 3*9w 1*18w. 2*18W 3*18w |
With light source: | LED/T10/T8 |
Lamp holder specifications: | Fa6. G13 |
Battery charging time: | <24h |
Emergency start time: | <0.3s |
Applicable cable outer diameter: | 9mm-14mm |
Emergency lighting time: 90min | 90min |
Protection level: | IP66 |
Anti-corrosion grade: | WF1 |