Car paint room lighting, petroleum refining, chemical, bio-pharmaceutical plants, ATEX explosion proof fluorescent light is the lighting of places that require high purity.
Model | MXEL 8198 |
Tube Power | 36W, 18W, 9W |
EX-proof Mark | Ex D IIC Gb T6 |
Cable Entry | G3/4" |
Input Voltage (V) | 2200VAC, 50-60Hz |
Light Source | LED |
LED Tubes Size | 600mm; 1200mm |
Temperature Group | T1~T5 |
Lamp Luminous Efficiency | 100lm/w |
Die casting aluminum shell, with high voltage electrostatic plastic-spray surface.
Easy to change the tube, just remove the end cover to change.
Electronic ballast, improve the power factor largely, COS>0.95.
Tempered glass lamp shade, stainless steel exposed fastener.
Steel pipe wiring or cable wiring.
1. Applicable to zone 1 and 2 of explosive environment;
2. Applicable to IIA, IIB, IIC explosive gas environment;
3. Applicable to zone 20, 21 and 22 of explosive dust environment;
4. Applicable to the environment where the temperature group is TI-T6;
5. ATEX explosion proof fluorescent light is mainly used in explosive and flammable places such as petrochemical industry. The installation can be hung or hung.
Example:
Car paint room lighting, petroleum refining, chemical, bio-pharmaceutical plants, ATEX explosion proof fluorescent light is the lighting of places that require high purity
Executive standard: | GB3836.1, GB3836.2.GB3836.3, IEC60079 |
Explosion-proof mark: | Ex d IIC T6 Gb |
Working voltage: | AC 220V |
Rated power: | 1*9w. 2*9w. 3*9w 1*18w. 2*18W 3*18w |
With light source: | LED/T10/T8 |
Lamp holder specifications: | Fa6. G13 |
Battery charging time: | <24h |
Emergency start time: | <0.3s |
Applicable cable outer diameter: | 9mm-14mm |
Emergency lighting time: 90min | 90min |
Protection level: | IP66 |
Anti-corrosion grade: | WF1 |